We only carry the MILSPEC versions
The VLTOR EMOD provides a variety of enhancements in comparison to other stocks. The increased length is a major benefit for those weapons using scoped rifles, as it increases the available comb for any length of pull. The EMOD is slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch making transitions from the ready position feel more natural.
Export Control:
Many of VLTOR’s products are export controlled by the International Traffic in Arms Regulations (ITAR). Shipments from VLTOR may contain products controlled by the U.S. DoS or the U.S. DoC. Export of such items may not be done without prior approval from the U.S. Government and VLTOR.
- Waterproof side battery compartments that holds 4 CR123 or three AA batteries in each compartment
- Weatherproof compartment in the clubfoot area of the stock that hold two AA batteries
- Comes pre-assembled with rubber buttpad and strike plate
- Matte (anti-reflection/anti-glare) finish
- Impact and temperature resistant polymer, specifically blended for VLTOR stocks
- Has standard military and quick disconnect swivel socket accessible from both sides
- Slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch making transitions from the ready position feel more natural
- Kit includes five position Mil-Spec receiver extension , carbine spring and buffer kit, VLTOR Lock Plate and VLTOR Lock Nut
- Available in Mil-Spec configurations
- Length with buttpad: 7.75 inches (at centerline of tube)
- Weight: 14 oz
- LOP fully collapsed: 11.50 inches
- LOP fully extended: 15.00 inches
- Buttpad angle: -5 degrees with decrease to -15 at toe
- Receiver extension is made of 7075 T6 impact extrusion
1. What is the difference between the EMOD and the IMOD stock?
The EMOD stock only comes in the clubfoot configuration whereas the IMOD comes in standard and clubfoot. The EMOD also has the additional storage compartment in the foot of the stock. The EMOD is 1.50 inches longer than the IMOD for longer length of pull.
2. Is there any adaptor that I can purchase to take off the battery compartments and have something fill the void?
At this time we do not sell a product that will allow you to take off the battery compartments and fill that void with something. The original modstock cheekweld adaptors will not fit the EMOD.
3. Do you sell a product or know of a product that I can install to raise the cheekweld on the stock?
We do not sell a product that will allow you to raise the cheekweld on the EMOD or IMOD stock nor do we know of anything that you can attach to the stock to make the cheekweld higher.
4. I lost my battery compartment caps. Can I purchase them through VLTOR?
Yes, VLTOR sells the compartment caps separately. Contact them to order
Reviews
There are no reviews yet.